Upat composite anchor UKA3 Plus M8

Name: Upat composite anchor UKA3 Plus M8
Brand: Upat

Tuotevaihtoehdot

Pakkausten hävittäminen

Lataa kuvatiedot

Top features

The portioned cartridge enables easy installation of mortar systems, prevents unnecessary excess consumption and saves time and costs.
Fastest curing time and highest loads save processing time and fixing points.

Cartridge system - As simple as it is secure. Approved for concrete, fire protection, and water-filled drill holes.

Advantages

Approved Fastening: According to European Technical Assessment for cracked and uncracked concrete (ETA Option 1) and fire protection testing
No Hole Cleaning Required: The glass cartridge clings to the borehole wall, eliminating the need for borehole cleaning
Highly efficient: Not too much, not too less- one borehole, one capsule, always the right amount of mortar - no waste
Work Without Worries: Approved for use in water-filled boreholes
Long Shelf Life: Up to 36 months
Cold-Resistant Application: Enables use at temperatures down to -15°C
Reduced Time Consumption: Due to short curing time and fast, easy installation

The Upat bonded anchor UKA3 Plus is a proven, highly efficient fastening system consisting of a mortar glass capsule and the anchor rod ASTA or the internal threaded anchor IST. The system has ETA approval for both cracked and uncracked concrete and is also suitable for use in dense natural stone. Common applications include heavy steel structures, railings, stairs, support feet and silos.

Properties

Certification/Approval: Concrete, Fire resistance, Hammer drilling, Hollow drilling, Drill hole cleaning without blowing out and brushing, Water-filled borehole
Load range in concrete: Tension load 3.9-61kN, Shear load 5.1-56.8kN
System component: Anchor rod ASTA, Internal threaded anchor IST
Temperature in anchoring base: -15°C to +40°C
Feature: Compatible with ASTA M8-M24/IST M8-M20

Functioning

Function: The hardener is stored separately from the resin and quartz sand in the glass capsule. When the anchor rod ASTA is vibrated into the borehole, the glass capsule is destroyed along with the hardener, resin, and quartz sand and mixed with the drilling dust. In the reaction, a fast-curing synthetic resin mortar is formed, which firmly binds the anchor rod ASTA in the borehole without the need for hole cleaning.

Installation: The Upat bonded anchor UKA3 Plus is installed with the Upat anchor rod ASTA in the pre-positioned installation method and with the Upat internal threaded anchor IST in the pre-installation method. Create borehole, set capsule, vibrate anchor rod/internal threaded anchor, observe curing time - done. The anchor rod ASTA and the internal threaded anchor IST are vibrated into the borehole with a drill in hammer-drill mode. The temperature in the substrate must not fall below the specified minimum value during the curing of the mortar. Minimum cartridge temperature -15°C.

Tools: Drill, drilling machine, setting tool (MW-SDS plus). For sizes M8-M20, the corresponding installation aid is included in each package.

Katso asennusohjeet PDF-muodossa

1 / 5