Universal injection mortar for a wide range of applications. Approved for concrete, masonry, seismic, fire protection, and post-installed rebar connections.

Injection mortar UPM44

The two-component vinylesterhybrid chemical anchor injection system UPM 44 is a professional fastening system designed for particularly high loads in all relevant building materials. When used with anchor rods UPM-A/ASTA or internal threaded anchors UPM-I/IST, UPM 44 boasts a comprehensive approval package for chemical fixings in perforated brick, solid brick, concrete, and aerated concrete. Moreover, this injection mortar stands out due to its multitude of approved system components and its approval for reinforcement connections.

Product Variant

Filter

Approvals / Test reports

6 product variants

Shelf life

Contents

Packaging

Amount

GTIN (EAN-Code)

Legend = Permission Available— = Permission not Available

Viewed 6 of 6 variant (s)

Advantages

Product

Comprehensive approval package: ETA concrete approval option 1, masonry, retroactive reinforcement connection, seismic and fire protection testing
High loads: Universal hybrid mortar with high load-bearing capacity thanks to optimised mortar formula
Carefree working: Suitable for use in water-filled drill holes
Efficient in perforated bricks: The sieve sleeve for use in perforated brick masonry bridges the plaster and minimises mortar consumption
Fastening close to edges: The expansion pressure-free fastening allows for small edge and centre distances and prevents installation damage in the edge area
Flexible working: By changing the static mixer, opened cartridges can be reused

Variants

Cartridge Pro (360/390 ml): For long storage life and series installation
Cartridge Standard (300 ml): For use with standard caulking guns
Cartridge Compact (150 ml): For individual fastenings
Profi case (Profi Box): For practical transport and professional organisation, with removable inserts and compartments
Craftsman's box (HWK): For safe storage, robust and stackable

Properties

Certification/Approval: ETA Option 1 cracked and uncracked concrete, masonry, post-installed rebar connection, seismic, fire resistance, hammer drilling, hollow drilling, water-filled borehole
Load range in concrete: Tension load 3.9-150.1kN, Shear load 6-90.2kN
Load range in masonry: Tension load 0.34-3.43kN, Shear load 0.26-3.28kN
System component: Anchor rod ASTA/UPM-A, Internal threaded anchor IST/UPM-I, perforated sleeve UPM-SH, concrete reinforcement, commercial threaded rods with 3.1 certificate of compliance
Temperature in anchoring base: -5°C to +40°C
Variant: Cartridge size 360/300/150ml
Accessories: Metal dispenser gun UPM MR or professional dispenser gun UPM DM P, Blow-out pump UPM AB, Cleaning brush UP BS

Functioning

Function: In the injection cartridges, resin and hardener are stored separately and only mixed into mortar when squeezed through the static mixer. The static mixer ensures bubble-free mixing of the two components and protects the injection mortar from curing inside the cartridge. The extruded injection mortar completely surrounds the anchor, bonds with the borehole wall, and seals the borehole. In perforated masonry and when using the perforated sleeve UPM-SH, the grid structure of the sieve sleeve ensures even distribution of the mortar in the borehole and prevents mortar loss in the cavity. Additionally, non-load-bearing layers can be bridged. For multiple uses of an injection mortar, the static mixer is not to be removed after the first use. The mortar cures inside the static mixer, which is only replaced for the next use

Installation: The Upat injection mortar UPM 44 is used with Upat anchor rods in pre-positioned or push through installation and with Upat internal thread anchors in pre-positioned installation. Set borehole, clean borehole. Use the perforated slee UPM-SH in perforated masonry. Fill borehole. Insert anchor rod. Screw on attachment - done. The anchor is pressed into the filled borehole by hand with gentle rotating movements. The temperature in the building material must not fall below the specified minimum value during the curing of the mortar. Minimum cartridge temperature +5°C. When setting the anchor rod in perforated masonry, it is recommended to use the Upat perforated sleeve UPM-SH

Tools: Drill, drill machine, blow-out pump (UPM AB), cleaning brush (UP BS), dispenser gun (UPM DM P/AM), torque wrench

1 / 5

ETA Certification Document

pdf, ETA-02/0022

European Technical Assessment for Upat injection system UPM 44 - Bonded anchor for use in concrete

Created on 07/28/2020

DOP - Declaration of Performance

pdf, DoP No. 0201

Created on 08/11/2020

DOP - Declaration of Performance

pdf, DoP No. 0065

Created on 08/26/2015

DOP - Declaration of Performance

pdf, DoP No. 0756-CPD-0287

Created on 06/25/2013

ETA Certification Document

pdf, ETA-15/0555

European Technical Assessment for Upat injection system UPM 44 for masonry - Metal Injection anchors for use in masonry

Created on 11/04/2025

DOP - Declaration of Performance

pdf, DoP No. 0202

Upat injection system UPM 44 - Metal injection anchors for use in masonry (Declaration of Performance acc. to ETA-15/0555)

Created on 01/15/2021

DOP - Declaration of Performance

pdf, DoP No. 0075

Created on 09/24/2015

ETA Certification Document

pdf, ETA-10/0388

European Technical Assessment for Rebar connection with injection system UPM 44 - Systems for post-installed rebar connections with mortar

Created on 11/20/2025

DOP - Declaration of Performance

pdf, DoP No. 0275

Created on 01/18/2021

DOP - Declaration of Performance

pdf, DoP No. 0066

Created on 07/03/2018

DOP - Declaration of Performance

pdf, DoP No. 0756-CPD-0376

Created on 06/25/2013

pdf,

pdf,

pdf,

pdf,

pdf,

pdf,

Installation Instructions

pdf,

UPM 44

ETA-approval
Seismic-Approval	C1 / C2
Shelf life	18 months
Contents	1 x cartridge 145 ml, 2 x static mixers
Packaging	—
Amount	1 pcs
GTIN (EAN-Code)	4000657005065

ETA-approval
Seismic-Approval	C1 / C2
Shelf life	12 months
Contents	1 x cartridge 300 ml, 2 x static mixers
Packaging	—
Amount	1 pcs
GTIN (EAN-Code)	4000657034928

ETA-approval
Seismic-Approval	C1 / C2
Shelf life	24 months
Contents	1 x cartridge 360 ml, 2 x static mixers
Packaging	—
Amount	1 pcs
GTIN (EAN-Code)	4000657008561

ETA-approval
Seismic-Approval	C1 / C2
Shelf life	24 months
Contents	12 x cartridges 360 ml, 24 x static mixers, 1 x metal dispensing gun, 1 x craftsman's case
Packaging	—
Amount	12 pcs
GTIN (EAN-Code)	4000657032184

ETA-approval
Seismic-Approval	C1 / C2
Shelf life	24 months
Contents	5 x cartridges 360 ml, 10 x static mixers, 1 x blow-out pump, 1 x brush set, 1 x professional dispensing gun, 1 x professional case
Packaging	—
Amount	5 pcs
GTIN (EAN-Code)	4000657002996

Injection mortar UPM44

Product Variant

Your advantages / Product description

Application and approval

Assembly instruction

Documents for Downloading