Upat Express Anchor IMC 12/140/234 GS gvz with large disc

Name: Upat Express Anchor IMC 12/140/234 GS gvz with large disc
Brand: Upat

Tuotevaihtoehdot

Pakkausten hävittäminen

Lataa kuvatiedot

Top features

Enlarged contact area is ideally suited for fixing wood constructions - The large washer reduces damage to wood when tightened.
Time-savings and error reduction through pre-installed washer.
Two anchorage depths for greater installation flexibility - Reduced anchorage depth reduces drilling effort thereby saving costs.
Two anchorage depths for greater installation flexibility - Standard embedment depth reduces the number of fixing points thanks to the high load bearing capacity.
Highly versatile in application - The long thread makes it suitable for stand-off installation.

The cost-effective specialist - The galvanised bolt anchor with large washer as an alternative in non-cracked concrete.

Advantages

Secure anchoring: ETA approval Option 7. Versatile use for secure anchoring in uncracked concrete
Near-edge fastening: The unit of cone and expansion clip allows for minimal edge and axial distances
Easy installation: Shaft with optimized diameter for low insertion energy.
Protected thread: Pronounced insertion pin protects the thread from damage during installation
Secure post-installation inspection: The head embossing allows for post-installation inspection
Safe insertion: The clip remains in position during insertion even with reinforcement hits and unfavorable drill holes

Material

Stainless steel (R/A4): For fastening outdoors or in damp rooms
Galvanised steel (gvz): For fastening in dry indoor areas

Variant

Short (K): The short version of the bolt anchor reduces the drill hole depth and the risk of hitting reinforcement, enabling quick installation while saving costs
Large washer (GS): The large washer protects the surface of the attachment and prevents cutting into wood.

The Upat express anchor bolt IMC is a true powerhouse and a cost-effective alternative among bolt anchors. This steel anchor is particularly suitable for fastening medium to heavy loads in uncracked concrete and dense natural stone. The express anchor bolt IMC is commonly used for fastening barriers, benches and pumps, for example.

Properties

Certification/Approval: ETA Option 7 Concrete uncracked
Load Range: Tension load 2.9-25.2 kN, shear load 6.9-38.6 kN
Material: Stainless Steel (R), zinc plated steel (gvz)
Variant: Standard, Short (K), large washer (GS)
Feature: Thread M6-M20, usable length 5-300mm
Accessories: Blow-out pump UPM AB

Functioning

Function: When tightening the nut, the bolt pushes into the expansion clip, which expands against the borehole wall

Installation: The Upat express anchor IMC is installed in through-setting mounting. Create borehole, clean borehole. Drive in anchor bolt. Tighten torque - done. Bolt diameter equals borehole diameter

Tools: Drill, drilling machine, blow-out pump (UPM AB), hammer, torque wrench

1 / 5

ETA-approval
Drill diameter( d₀ )	12 mm
Max. fixture thickness (standard)( t_fix )	140 mm
Max. fixture thickness (reduced)( t_fix )	155 mm
Min. drill hole depth for through fixings( h₂ )	225 mm
Width across nut	19 mm
Washer (outer diameter x thickness)	44 x 4 mm
Installation torque( T_inst )	50 Nm
Amount	10 pcs
GTIN (EAN-Code)	4000657018546

Upat Express Anchor IMC 12/140/234 GS gvz with large disc

Edut / Tuotekuvaus

Hakemus ja hyväksyminen

Kokoamisohje

Tekniset tiedot

Ladattavat asiakirjat