The efficient fastener

Bolt anchor IFA

The Upat IFA bolt anchor is a cost-effective solution for standard fixings. It is suitable for installing medium loads in concrete or natural stone. The IFA can be installed using either pre-positioned or through installation and is easily hammered into the prepared drill hole. When the nut is tightened, the cone is drawn into the expansion clip, which expands against the wall of the hole to ensure a secure anchoring. Typical applications include fastening cable trays, brackets, shelves, and stair railings.

Tuotevaihtoehdot

34 Tuotevaihtoehtoa

Drill diameter

Min. drill hole depth for through fixings

Anchor length

Thread

Width across nut

Installation torque

Amount

GTIN (EAN-Code)

Drill diameter( d₀ )	6 mm
Min. drill hole depth for through fixings( h₂ )	55 mm
Anchor length( l )	55 mm
Thread( M )	M6
Width across nut	10 mm
Installation torque( T_inst )	4 Nm
Amount	100 pcs
GTIN (EAN-Code)	4000657041117

Drill diameter( d₀ )	6 mm
Min. drill hole depth for through fixings( h₂ )	70 mm
Anchor length( l )	70 mm
Thread( M )	M6
Width across nut	10 mm
Installation torque( T_inst )	4 Nm
Amount	100 pcs
GTIN (EAN-Code)	4000657041124

Drill diameter( d₀ )	8 mm
Min. drill hole depth for through fixings( h₂ )	50 mm
Anchor length( l )	50 mm
Thread( M )	M8
Width across nut	13 mm
Installation torque( T_inst )	10 Nm
Amount	50 pcs
GTIN (EAN-Code)	4000657041131

Drill diameter( d₀ )	8 mm
Min. drill hole depth for through fixings( h₂ )	60 mm
Anchor length( l )	60 mm
Thread( M )	M8
Width across nut	13 mm
Installation torque( T_inst )	10 Nm
Amount	50 pcs
GTIN (EAN-Code)	4000657041148

Drill diameter( d₀ )	8 mm
Min. drill hole depth for through fixings( h₂ )	65 mm
Anchor length( l )	65 mm
Thread( M )	M8
Width across nut	13 mm
Installation torque( T_inst )	10 Nm
Amount	50 pcs
GTIN (EAN-Code)	4000657041155

Drill diameter( d₀ )	8 mm
Min. drill hole depth for through fixings( h₂ )	80 mm
Anchor length( l )	80 mm
Thread( M )	M8
Width across nut	13 mm
Installation torque( T_inst )	10 Nm
Amount	50 pcs
GTIN (EAN-Code)	4000657041162

Drill diameter( d₀ )	8 mm
Min. drill hole depth for through fixings( h₂ )	95 mm
Anchor length( l )	95 mm
Thread( M )	M8
Width across nut	13 mm
Installation torque( T_inst )	10 Nm
Amount	50 pcs
GTIN (EAN-Code)	4000657041216

Drill diameter( d₀ )	8 mm
Min. drill hole depth for through fixings( h₂ )	120 mm
Anchor length( l )	120 mm
Thread( M )	M8
Width across nut	13 mm
Installation torque( T_inst )	10 Nm
Amount	50 pcs
GTIN (EAN-Code)	4000657041223

Drill diameter( d₀ )	10 mm
Min. drill hole depth for through fixings( h₂ )	115 mm
Anchor length( l )	115 mm
Thread( M )	M10
Width across nut	17 mm
Installation torque( T_inst )	25 Nm
Amount	25 pcs
GTIN (EAN-Code)	4000657041261

Drill diameter( d₀ )	10 mm
Min. drill hole depth for through fixings( h₂ )	130 mm
Anchor length( l )	130 mm
Thread( M )	M10
Width across nut	17 mm
Installation torque( T_inst )	25 Nm
Amount	25 pcs
GTIN (EAN-Code)	4000657041278

Drill diameter( d₀ )	10 mm
Min. drill hole depth for through fixings( h₂ )	140 mm
Anchor length( l )	140 mm
Thread( M )	M10
Width across nut	17 mm
Installation torque( T_inst )	25 Nm
Amount	25 pcs
GTIN (EAN-Code)	4000657041292

Drill diameter( d₀ )	10 mm
Min. drill hole depth for through fixings( h₂ )	200 mm
Anchor length( l )	200 mm
Thread( M )	M10
Width across nut	17 mm
Installation torque( T_inst )	25 Nm
Amount	25 pcs
GTIN (EAN-Code)	4000657041339

Drill diameter( d₀ )	12 mm
Min. drill hole depth for through fixings( h₂ )	80 mm
Anchor length( l )	80 mm
Thread( M )	M12
Width across nut	19 mm
Installation torque( T_inst )	40 Nm
Amount	25 pcs
GTIN (EAN-Code)	4000657041346

Lisää tuloksia

34 tuotevaihtoehdosta katsottu 18

Advantages

Secure anchorage is achieved through the proven expansion principle for standard fixings without approval.

Properties

Material: Steel, zinc-plated (zp), for use in dry indoor applications.
Features: Thread sizes from M6 to M20, usable lengths from 5 to 180 mm.
Load range: Recommended tensile loads from 1.3 to 16.0 kN and recommended shear loads from 1.3 to 13.5 kN.
Accessories: Blower UPM AB.

Functioning

Function: When the nut is tightened, the cone is pulled into the expansion clip, which expands against the drill hole wall and ensures secure fastening.

Installation: The Upat IFA expansion anchor can be installed in pre-positioned or through-installation. Drill the hole, clean it, drive in the anchor and tighten the nut – done. The bolt diameter corresponds to the drill hole diameter.

Tools: Drill bit, drilling machine, blower, hammer and wrench.

1 / 5

1
2
3
4
5

Bolt anchor IFA

Tuotevaihtoehdot

Edut / Tuotekuvaus

Kokoamisohje

Ladattavat asiakirjat