Cost-effective injection mortar for simple fixings. Without approval. Suitable for concrete and masonry.

Injection mortar UPM11

The affordable injection mortar for simple fastenings. Suitable for concrete, solid and perforated building materials. For medium loads. Selectable product features Cartridge size 360/300 ml. Additional system components Anchor rods (UPM-A/ASTA) or internal thread anchors (UPM-I/IST). Used in pre-insertion or push-through installation. Features inexpensive anchoring, fastening close to edges and flexible working. Used, for example, for fastening light strips, monitor brackets and handrails.

Tuotevaihtoehdot

2 Tuotevaihtoehtoa

Shelf life

Contents

Amount

GTIN (EAN-Code)

Shelf life	12 months
Contents	1 x cartridge 300 ml, 2 x static mixers
Amount	1 pcs
GTIN (EAN-Code)	4000657938349

Shelf life	15 months
Contents	1 x cartridge 360 ml, 2 x static mixers
Amount	1 pcs
GTIN (EAN-Code)	4000657006406

2 tuotevaihtoehdosta katsottu 2

Advantages

Product

Cost-effective anchoring: The cost-effective mortar for non-approval-relevant fastening
Fastening close to edges: The expansion pressure-free fastening allows for small edge and centre distances and prevents installation damage in the edge area
Flexible working: By changing the static mixer, opened cartridges can be reused

Variants

Cartridge Pro (360/390 ml): For long storage life and series installation
Cartridge Standard (300 ml): For use with standard caulking guns

Properties

Suitable for: Concrete, masonry, hammer drilling
Load range in masonry: Tension load 0.6-1.7kN, shear load 0.6-1.7kN
System component: Anchor rod ASTA/UPM-A, internal threaded anchor IST/UPM-I, perforated sleeve UPM-SH
Temperature in anchoring base: 0°C to 40°C
Variant: Cartridge size 360/300 ml
Accessories: Metal dispenser gun UPM MR or professional dispenser gun UPM DM P, Blow-out pump UPM AB, Cleaning brush UP BS

Functioning

Function: In the two-chamber cartridge, resin and hardener are stored separately and only mixed into mortar when squeezed through the static mixer. The static mixer ensures bubble-free mixing of the two components and protects the injection mortar from curing inside the cartridge. The extruded injection mortar completely surrounds the anchor, bonds with the borehole wall, and seals the borehole. In perforated masonry and when using the sieve sleeve, the grid structure of the sieve sleeve ensures even distribution of the mortar in the borehole and prevents mortar loss in the cavity. Additionally, non-load-bearing layers can be bridged. For multiple uses of an injection mortar, the static mixer is not removed after the first use. The mortar cures inside the static mixer, which is only replaced for the next use

Installation: The Upat injection mortar UPM 11 is used with Upat anchor rods in pre-insertion or through-hole installation and with Upat internal thread anchors in pre-insertion installation. Set borehole, clean borehole. Use sieve sleeve in perforated masonry. Fill borehole. Insert anchor. Screw on attachment - done. The anchor is pressed into the filled borehole by hand with gentle rotating movements. The temperature in the construction material must not fall below the specified minimum value during the curing of the mortar. Minimum cartridge temperature +5°C. When setting the anchor in perforated masonry, it is recommended to use the Upat sieve sleeve UPM-SH

Tools: Drill, drill machine, blow-out pump (UPM AB), cleaning brush (UP BS), dispenser gun (UPM DM P/AM), torque wrench

1 / 5

Injection mortar UPM11

Tuotevaihtoehdot

Edut / Tuotekuvaus

Hakemus ja hyväksyminen

Kokoamisohje

Ladattavat asiakirjat