Time-saving drop-in anchor for quick installation with internal thread. Approved for concrete and fire protection.

Drop-in anchor USA

The Upat drop-in anchor USA is the time-saving solution for fastening through screws with metric threads and threaded rods. This internal thread anchor is particularly suitable for fastening in concrete and natural stone with a dense structure. The drop-in anchor USA is commonly used for overhead installation and in cases of low concrete thickness for the approved fastening of non-load-bearing systems such as pipe runs and ventilation ducts.

Product Variant

Download image data

Product Variant

Approvals / Test reports

11 product variants

Drill diameter

Min. drill hole depth

Min. effect. anchorage depth

Min. bolt penetration

Max. bolt penetration

Amount

Legend = Permission Available— = Permission not Available

Viewed 11 of 11 variant (s)

Advantages

Tested safety: ETA approval option 1 cracked concrete for redundant non-structural systems, ETA approval aption 7 uncracked concrete, as well as fire resistance and sprinkler systems.
Easy impact installation: The rim secures the drop-in anchor against slipping into the drill hole and allows for flush mounting
No torque required: No torque is required for the metric screws due to the impact installation
High loads: The drop-in anchor sleeve with internal expansion cone enables high load capacities in concrete
Robust anchoring: The drop-in anchor sleeve is pressed from one piece without cutting and is particularly resistant
Flexible mounting: The metric internal thread allows for flexible mounting and flush dismantling of threaded rods, hooks, or screws
Secure setting control: The embossing applied during spreading with the setting tool simplifies the control of the anchorage and provides high application safety

Materials

Stainless steel (R): For external atmospheric exposure and to permanently damp internal conditions, if no particular aggressive conditions exists
Zinc plated steel (gvz): For dry internal conditions

Properties

Approval: ETA Option 7 uncracked concrete, ETA multiple fastening cracked concrete, ETA multiple fastening in prestressed hollow-core slab, fire test, VdS CEA guidelines compliant
Load range: Tension load 5.9-16.8 kN, shear load 4.9-33.5 kN
Material: Stainless steel (R), zinc plated steel (gvz)
Feature: Thread M6-M12
Accessories: Blow-out pump UPM AB, setting tool USA-SWZ

Functioning

Function: When driving in the setting tool, the expansion cone is pressed against the conically shaped anchor sleeve, expanding the drop-in anchor against the borehole wall. The expansion cone remains in position, so the anchor remains securely in place when a screw is inserted or removed

Installation: The Upat drop-in anchor USA is installed in pre-insertion mounting. Create borehole, clean borehole. Drive in drop-in anchor. Drive in setting tool. Assemble component with screw - done

Tools: Drill, drilling machine, blow-out pump (UPM AB), hammer, setting tool (USA-SWZ)

1 / 5

ETA Certification Document

pdf, ETA-10/0168

European Technical Assessment for Upat drop-in anchor USA - Fasteners for use in concrete for redundant non-structural systems

Created on 05/11/2022

DOP - Declaration of Performance

pdf, DoP No. 0306

Created on 05/25/2022

DOP - Declaration of Performance

pdf, DoP No. 0265

Created on 01/12/2021

DOP - Declaration of Performance

pdf, DoP No. 0063

Created on 05/18/2017

DOP - Declaration of Performance

pdf, DoP No. 0756-CPD-0320

Created on 06/21/2013

ETA Certification Document

pdf, ETA-10/0172

European Technical Assessment for Upat drop-in anchor USA - Mechanical fasteners for use in concrete

Created on 05/11/2022

DOP - Declaration of Performance

pdf, DoP No. 0305

Created on 06/21/2022

DOP - Declaration of Performance

pdf, DoP No. 0264

Created on 01/12/2021

DOP - Declaration of Performance

pdf, DoP No. 0062

Created on 05/16/2017

DOP - Declaration of Performance

pdf, DoP No. 0756-CPD-0321

Created on 06/21/2013

ETA-approval
Drill diameter ( d₀ )	10 mm
Min. drill hole depth ( h₁ )	43 mm
Min. effect. anchorage depth ( h_ef )	40 mm
Min. bolt penetration ( l_E,min )	8 mm
Max. bolt penetration ( l_E,max )	13 mm
Amount	100 pcs
GTIN (EAN-Code)	4000657010496

ETA-approval
Drill diameter ( d₀ )	12 mm
Min. drill hole depth ( h₁ )	43 mm
Min. effect. anchorage depth ( h_ef )	40 mm
Min. bolt penetration ( l_E,min )	10 mm
Max. bolt penetration ( l_E,max )	17 mm
Amount	50 pcs
GTIN (EAN-Code)	4000657010588

ETA-approval
Drill diameter ( d₀ )	15 mm
Min. drill hole depth ( h₁ )	54 mm
Min. effect. anchorage depth ( h_ef )	50 mm
Min. bolt penetration ( l_E,min )	12 mm
Max. bolt penetration ( l_E,max )	22 mm
Amount	50 pcs
GTIN (EAN-Code)	4000657010595

ETA-approval
Drill diameter ( d₀ )	20 mm
Min. drill hole depth ( h₁ )	70 mm
Min. effect. anchorage depth ( h_ef )	65 mm
Min. bolt penetration ( l_E,min )	16 mm
Max. bolt penetration ( l_E,max )	28 mm
Amount	20 pcs
GTIN (EAN-Code)	4000657010625

ETA-approval
Drill diameter ( d₀ )	25 mm
Min. drill hole depth ( h₁ )	85 mm
Min. effect. anchorage depth ( h_ef )	80 mm
Min. bolt penetration ( l_E,min )	20 mm
Max. bolt penetration ( l_E,max )	34 mm
Amount	20 pcs
GTIN (EAN-Code)	4000657010649

Drop-in anchor USA

Product Variant

Your advantages / Product description

Application and approval

Assembly instruction

Documents for Downloading