Time-saving drop-in anchor for quick installation with internal thread. Approved for concrete and fire protection.

Drop-In Anchor IDA

The Upat drop-in anchor IDA is the time-saving solution for fastening through screws with metric threads and threaded rods. This internal thread anchor is particularly suitable for fastening in concrete and natural stone with a dense structure. The drop-in anchor IDA is commonly used for overhead installation and in cases of low concrete thickness for the approved fastening of non-load-bearing systems such as pipe runs and ventilation ducts.

Product Variant

11 product variants

Drill diameter

Min. drill hole depth

Min. effect. anchorage depth

Min. bolt penetration

Max. bolt penetration

Amount

GTIN (EAN-Code)

Drill diameter( d₀ )	8 mm
Min. drill hole depth( h₁ )	27 mm
Min. effect. anchorage depth( h_ef )	25 mm
Min. bolt penetration( l_E,min )	6 mm
Max. bolt penetration( l_E,max )	14 mm
Amount	100 pcs
GTIN (EAN-Code)	4000657042060

Drill diameter( d₀ )	8 mm
Min. drill hole depth( h₁ )	32 mm
Min. effect. anchorage depth( h_ef )	30 mm
Min. bolt penetration( l_E,min )	6 mm
Max. bolt penetration( l_E,max )	13 mm
Amount	100 pcs
GTIN (EAN-Code)	4000657042145

Drill diameter( d₀ )	10 mm
Min. drill hole depth( h₁ )	33 mm
Min. effect. anchorage depth( h_ef )	30 mm
Min. bolt penetration( l_E,min )	8 mm
Max. bolt penetration( l_E,max )	13 mm
Amount	100 pcs
GTIN (EAN-Code)	4000657042077

Drill diameter( d₀ )	10 mm
Min. drill hole depth( h₁ )	33 mm
Min. effect. anchorage depth( h_ef )	30 mm
Min. bolt penetration( l_E,min )	8 mm
Max. bolt penetration( l_E,max )	13 mm
Amount	100 pcs
GTIN (EAN-Code)	4000657042152

Drill diameter( d₀ )	10 mm
Min. drill hole depth( h₁ )	43 mm
Min. effect. anchorage depth( h_ef )	40 mm
Min. bolt penetration( l_E,min )	8 mm
Max. bolt penetration( l_E,max )	13 mm
Amount	100 pcs
GTIN (EAN-Code)	4000657042084

Drill diameter( d₀ )	12 mm
Min. drill hole depth( h₁ )	43 mm
Min. effect. anchorage depth( h_ef )	40 mm
Min. bolt penetration( l_E,min )	10 mm
Max. bolt penetration( l_E,max )	17 mm
Amount	50 pcs
GTIN (EAN-Code)	4000657042237

Drill diameter( d₀ )	12 mm
Min. drill hole depth( h₁ )	33 mm
Min. effect. anchorage depth( h_ef )	30 mm
Min. bolt penetration( l_E,min )	10 mm
Max. bolt penetration( l_E,max )	14 mm
Amount	50 pcs
GTIN (EAN-Code)	4000657042091

Drill diameter( d₀ )	15 mm
Min. drill hole depth( h₁ )	54 mm
Min. effect. anchorage depth( h_ef )	50 mm
Min. bolt penetration( l_E,min )	12 mm
Max. bolt penetration( l_E,max )	22 mm
Amount	50 pcs
GTIN (EAN-Code)	4000657042244

Drill diameter( d₀ )	12 mm
Min. drill hole depth( h₁ )	43 mm
Min. effect. anchorage depth( h_ef )	40 mm
Min. bolt penetration( l_E,min )	10 mm
Max. bolt penetration( l_E,max )	17 mm
Amount	50 pcs
GTIN (EAN-Code)	4000657042107

Drill diameter( d₀ )	15 mm
Min. drill hole depth( h₁ )	54 mm
Min. effect. anchorage depth( h_ef )	50 mm
Min. bolt penetration( l_E,min )	12 mm
Max. bolt penetration( l_E,max )	22 mm
Amount	50 pcs
GTIN (EAN-Code)	4000657042114

Drill diameter( d₀ )	20 mm
Min. drill hole depth( h₁ )	70 mm
Min. effect. anchorage depth( h_ef )	65 mm
Min. bolt penetration( l_E,min )	16 mm
Max. bolt penetration( l_E,max )	28 mm
Amount	20 pcs
GTIN (EAN-Code)	4000657042121

Viewed 11 of 11 variant (s)

Advantages

Tested safety: ETA approval option 1 cracked concrete for redundant non-structural systems, ETA approval aption 7 uncracked concrete, as well as fire resistance and sprinkler systems.
Easy impact installation: The rim secures the drop-in anchor against slipping into the drill hole and allows for flush mounting
No torque required: No torque is required for the metric screws due to the impact installation
High loads: The drop-in anchor sleeve with internal expansion cone enables high load capacities in concrete
Robust anchoring: The drop-in anchor sleeve is pressed from one piece without cutting and is particularly resistant
Flexible mounting: The metric internal thread allows for flexible mounting and flush dismantling of threaded rods, hooks, or screws
Secure setting control: The embossing applied during spreading with the setting tool simplifies the control of the anchorage and provides high application safety

Materials

Stainless steel (R): For external atmospheric exposure and to permanently damp internal conditions, if no particular aggressive conditions exists

Zinc plated steel (gvz): For dry internal conditions

Properties

Approval: ETA Option 7 uncracked concrete, ETA multiple fastening cracked concrete, ETA multiple fastening in prestressed hollow-core slab, fire test, VdS CEA guidelines compliant
Load range: Tension load 2,0-16,0 kN, shear load 4,0-27,0 kN
Material: Stainless steel (R), zinc plated steel (gvz)
Feature: Thread M6-M12
Accessories: Blow-out pump UPM AB, setting tool USA-SWZ

Functioning

Function: When driving in the setting tool, the expansion cone is pressed against the conically shaped anchor sleeve, expanding the drop-in anchor against the borehole wall. The expansion cone remains in position, so the anchor remains securely in place when a screw is inserted or removed

Installation: The Upat drop-in anchor IDA is installed in pre-insertion mounting. Create borehole, clean borehole. Drive in drop-in anchor. Drive in setting tool. Assemble component with screw - done

Tools: Drill, drilling machine, blow-out pump (UPM AB), hammer, setting tool (USA-SWZ)

1 / 5

Drop-In Anchor IDA

Product Variant

Your advantages / Product description

Application and approval

Assembly instruction

Documents for Downloading