Cost-saving perforated sleeve for fixings in perforated brick.

Perforated sleeve UPM-SH

The Upat perforated sleeve UPM-SH is an innovative component designed for the optimal use of Upat injection mortars in conjunction with anchor rods UPMA-A/ASTA or internal thread anchors UPM-I/IST in perforated masonry. The perforated sleeve is inserted into the drilled hole and filled with injection mortar from the base of the perforated sleeve. When setting the anchor rod or internal thread anchor, the mortar is pushed through the lattice structure and securely connects with the perforated masonry. This allows the load to be transferred into the building material. The perforated sleeve UPM-SH can also bridge non-load-bearing layers.

Product Variant

Download image data

Product Variant

7 product variants

Drill diameter

Min. drill hole depth

Min. effect. anchorage depth

Amount

GTIN (EAN-Code)

Viewed 7 of 7 variant (s)

Advantages

Minimal Mortar Consumption: The optimized hole pattern structure of the sieve sleeve ensures the lowest possible mortar consumption, resulting in significant cost savings
Simple and Cost-Effective: One sieve sleeve suitable for multiple anchor rod diameters. Innovative centering wings secure the anchor rods
Special Barbs Prevent Falling Out During Overhead Installation
Optimized Interlocking in Hollow Blocks through the Use of the Sieve Sleeve
ETA Approval - Approved System

Properties

System component: Injection mortar UPM 44/UPM 33/UPM 11
Suitable for: Masonry
Material: Plastic
Feature: Compatible with UPM-A/ASTA M6-M16/UPM-I M6-M12, Drill diameter 12-20mm, Anchorage depth 50-200mm

Drill diameter ( d₀ )	12 mm
Min. drill hole depth ( h₁ )	60 mm
Min. effect. anchorage depth ( h_ef )	50 mm
Amount	50 pcs
GTIN (EAN-Code)	8001132419120

Drill diameter ( d₀ )	12 mm
Min. drill hole depth ( h₁ )	95 mm
Min. effect. anchorage depth ( h_ef )	85 mm
Amount	50 pcs
GTIN (EAN-Code)	8001132419137

Drill diameter ( d₀ )	16 mm
Min. drill hole depth ( h₁ )	140 mm
Min. effect. anchorage depth ( h_ef )	130 mm
Amount	20 pcs
GTIN (EAN-Code)	8001132419151

Drill diameter ( d₀ )	16 mm
Min. drill hole depth ( h₁ )	95 mm
Min. effect. anchorage depth ( h_ef )	85 mm
Amount	50 pcs
GTIN (EAN-Code)	8001132419144

Drill diameter ( d₀ )	20 mm
Min. drill hole depth ( h₁ )	95 mm
Min. effect. anchorage depth ( h_ef )	85 mm
Amount	20 pcs
GTIN (EAN-Code)	8001132419168

Perforated sleeve UPM-SH

Product Variant

Your advantages / Product description

Assembly instruction