UHB-INJECT-A S M10 X 60/20

UPM 66-360

For maximum holding power with minimal installation effort: the strongest bonded anchor. Approved for concrete and fire protection.

Advantages

Wide range of approvals: ETA concrete approval option 1 and fire protection test
Coordinated system: Optimally coordinated system with high performance thanks to the combination of UPM 66 injection mortar and UHB composite anchors
Optimal load transfer: The bond between the injection mortar and the cone anchor geometry enables optimal load transfer
Wide range of applications: Also suitable for bridge railings in accordance with guideline drawing GEL 14
Fastening close to edges: Minimal edge and centre distances with high load-bearing capacity
Time-saving installation: Hollow drilling is possible in accordance with approvals and reduces installation time
Flexible installation: Suitable for pre-installation and push-through installation

Material

Stainless steel (R): For fastenings outdoors or in damp rooms
Galvanised steel (gvz): For fastenings in dry indoor areas

Variant

Long anchoring depth (L): For maximum tensile load
Short anchoring depth (S): For minimal installation effort

The Upat high-performance bonded anchor UPM 66, used in conjunction with the composite anchors UHB Inject-A, represents the highest standards and an ideal installation. This bonded anchor, with its wide range of approvals, allows for minimal spacings and edge distances, reducing installation time. It is particularly suitable for securing the highest loads in both cracked and uncracked concrete, such as railings, masts, and steel structures.

Properties

System component: Injection mortar UPM 66 (Item number 546973)
Suitable for: Concrete
Variant: Long anchorage depth (L), Short anchorage depth (S)
Material: Zinc plated steel (gvz), Stainless steel (R)
Feature: Thread M8-M24, Usable length 10-165mm

ETA-approval
Drill diameter ( d₀ )	10 mm
Fire resistance	R120
Drill hole depth ( h₀ )	66 mm
Anchorage depth ( h_ef )	60 mm
Max. fixture thickness ( t_fix )	20 mm
Thread ( M )	M10
Length ( l )	100 mm
Amount	10 pcs
GTIN (EAN-Code)	4000657023717

UHB-INJECT-A S M10 X 60/20

Your advantages / Product description

Application and approval

Assembly instruction

Technical Data

Documents for Downloading